English | 简体中文
Model: NM-K230-350 | Document version: V1.2 | Last updated: 2026-11-04
RockBase IoT K230-Vision is an open-source intelligent vision development board / terminal built on Canaan's K230 platform, integrating a touch display, image capture, edge AI compute, audio I/O, and peripheral expansion in one device.
The module is built around the K230 dual-core RISC-V processor paired with a third-generation KPU delivering 6 TOPS of on-device AI compute, so visual inference runs locally without uploading images to the cloud. On-board hardware includes a 3.5-inch touchscreen, a GC2093 camera, a DMIC, and an amplifier with speaker, plus a 40-pin GPIO header, USB HOST, and three UART / I²C expansion ports. It works either as a standalone AI vision terminal or as a vision front end for an external host controller.
Two configurations are available — the Base Development Kit and the Complete Unit Kit. Both share the same core platform; they differ in enclosure, bundled parts, and intended use. Typical applications include machine vision, image recognition, AI algorithm demos, embedded development, teaching labs, and prototyping.
Note: the complete-unit enclosure is currently 3D printed. It suits prototyping and demos and provides no water, dust, or industrial shock resistance.
- Key Specifications
- 1 Product Overview
- 2 Kit Versions and Package Contents
- 3 Features
- 4 Technical Specifications
- 5 Interfaces and Expansion
- 6 Buttons and Power Control
- 7 Quick Start
- 8 RockBase System and AI Applications
- 9 Power, Charging, and Optional Battery
- 10 Troubleshooting
- 11 Safety and Maintenance
- 12 Development Resources
- Repository Structure
- Contributing
- License
| Item | Specification |
|---|---|
| Product name | K230-Vision |
| Model | NM-K230-350 |
| Platform | K230, dual RISC-V cores (big core up to 1.6 GHz / little core up to 0.8 GHz) |
| AI compute | KPU, 6 TOPS |
| Memory | 1 GB LPDDR4 RAM |
| Display | 3.5-inch MIPI capacitive multi-touch, 480 × 800 |
| Camera | GC2093, 2 MP, 73° diagonal FOV |
| Wireless | Realtek RTL8189FTV Wi-Fi |
| Power input | USB Type-C 5 V / DC 8–24 V / optional 4.2 V 800 mAh battery |
| Enclosure | 3D-printed prototype enclosure (complete unit kit) |
K230-Vision targets edge AI workloads that need low latency, data privacy, and autonomous operation. The touchscreen drives menu navigation, camera preview, and recognition result display; a passive heatsink keeps sustained vision processing stable; the board-level expansion headers connect external sensors and host controllers.
| Kit | Standard contents | Options / notes |
|---|---|---|
| Complete Unit Kit | Enclosure, 3.5-inch display, camera, button switches, speaker | Recommended battery: 802540, 4.2 V, 800 mAh |
| Base Development Kit | 3.5-inch display, K230 development board, camera mounting backplate | The backplate mounts the camera and provides basic structural protection for the board |
| Complete Unit Kit | Base Development Kit |
|---|---|
![]() |
![]() |
| Complete unit kit (with 3D-printed enclosure) | Base development kit (board + backplate) |
Unpacking check: package contents vary by sales configuration. Verify the unit or development board, display, camera, backplate, speaker, and accessories against your order. When no battery is selected, the package does not include one.
- K230 dual RISC-V cores: CPU 1 (big core) up to 1.6 GHz, CPU 0 (little core) up to 0.8 GHz.
- KPU with 6 TOPS of AI compute for local intelligent vision inference.
- 1 GB LPDDR4 RAM as standard; actual capacity depends on the purchased configuration and what the system reports.
- RockBase IoT fully open-source embedded GUI system with more than 20 AI vision applications integrated.
- 3.5-inch 480 × 800 MIPI capacitive multi-touch display with five-point touch.
- GC2093 2 MP camera; the development board supports up to three MIPI camera connections.
- RTL8189FTV Wi-Fi, DMIC, amplifier, and built-in speaker integrated on board.
- USB Type-C, USB HOST Type-A, 40-pin GPIO, and three UART / I²C expansion interfaces.
- Passive heatsink for sustained vision processing and edge AI experiments.
| Item | Specification |
|---|---|
| Product name | K230-Vision |
| Model | NM-K230-350 |
| Platform | K230; dual RISC-V cores |
| CPU | CPU 1 (big core) up to 1.6 GHz; CPU 0 (little core) up to 0.8 GHz |
| KPU | 6 TOPS |
| Memory | 1 GB LPDDR4 RAM |
| Wi-Fi | Realtek RTL8189FTV |
| Display | 3.5-inch MIPI capacitive multi-touch display |
| Resolution | 480 × 800 |
| Touch | Capacitive multi-touch (five-point) |
| Camera | GC2093, 2 MP |
| Field of view | 73° diagonal; 65° horizontal; 40° vertical |
| Camera expansion | Up to three MIPI camera connections |
| Audio | DMIC, amplifier, built-in speaker |
| Board expansion | 40-pin GPIO; three UART / I²C ports |
| USB | USB Type-C; USB HOST Type-A |
| USB power / charging | 5 V; USB charging |
| DC input | 8–24 V DC |
| Battery (optional) | Recommended model: 802540, 4.2 V, 800 mAh |
| Charging current | Approximately 750 mA |
| Enclosure | 3D-printed prototype enclosure (complete unit kit) |
Not specified: system / firmware version, on-board storage capacity, and GPIO absolute maximum ratings vary with hardware and software revisions and are deliberately not asserted here.
| Interface | Purpose | Usage notes |
|---|---|---|
| USB Type-C | 5 V power, USB charging, and version-dependent functions | Use a compliant power supply and cable; never apply an over-specification voltage |
| USB HOST Type-A | Connect system-supported USB peripherals | Power high-draw peripherals separately or through a powered hub |
| 40-pin GPIO | Digital IO, power, and peripheral expansion | Wire with the device powered off; verify 3.3 V logic, direction, and common ground |
| Three UART / I²C ports | Internal or external serial expansion | Verify levels, addresses, baud rates, pin multiplexing, and connector orientation |
| MIPI camera | Up to three camera connections | Connect and disconnect with power off; verify cable orientation, connector, and software channel |
| microSD | System image or data storage | Insert and remove only after a software shutdown; never force a card out during access |
| DC input | 8–24 V external power | Verify voltage and polarity; reverse polarity is prohibited |
Warning: never connect 5 V directly to 3.3 V IO. Do not hot-plug board-level ribbon cables, short pins, or cross-connect 5V, 3V3, and GND.
| Complete unit — front | Complete unit — rear |
|---|---|
![]() |
![]() |
The front touchscreen handles menu operation, camera preview, and AI recognition results. The rear side carries the camera, passive heatsink, speaker openings, 40-pin GPIO, and USB HOST. Keep the lens, heatsink, and speaker openings unobstructed during use.
| Base kit — front | Base kit — rear |
|---|---|
![]() |
![]() |
The base development kit consists of the display, the development board, and the camera mounting backplate. Standoffs connect the layers; the backplate protects the main components and provides the camera mounting position.
| Board — front | Board — rear |
|---|---|
![]() |
![]() |
The block diagrams identify major components and interface locations. Before connecting GPIO, UART, I²C, MIPI, or internal power, cross-check the board silkscreen, schematic, and software configuration for the hardware revision you received.
Caution: ribbon cables, MIPI connectors, and board-level interfaces must be handled only with the device fully powered off.
The complete unit exposes its expansion IO on the rear of the enclosure: a 40-pin GPIO header, three UART ports (UART0 / UART2 / UART3, two of them shared with I²C2), and the BOOT / USER buttons.
| Row | Pin order (left to right) |
|---|---|
| Top | 5V, 5V, GND, IO3, IO4, IO47, GND, IO18, IO19, GND, IO27, IO14, IO61, IO40, GND, IO46, GND, IO35, IO34, IO33 |
| Bottom | 3V3, IO49, IO48, IO2, GND, IO5, IO6, IO26, 3V3, IO16, IO17, IO15, GND, IO41, IO36, IO37, IO52, IO42, IO32, GND |
The header provides 2 × 5V, 2 × 3V3, 8 × GND, and 28 GPIO pins. All GPIO are 3.3 V logic. Before use, confirm the pin multiplexing (GPIO, PWM, I²S, etc.) in the software configuration of your firmware.
| Port | Pin 1 | Pin 2 | Pin 3 | Pin 4 | Additional pins |
|---|---|---|---|---|---|
| UART0 | 5V | RXD0 (IO39) | TXD0 (IO38) | GND | — |
| UART2 | 5V | RXD2 (IO12) | TXD2 (IO11) | GND | SDA2 / SCL2 (I²C2) |
| UART3 | 5V | RXD3 (IO51) | TXD3 (IO50) | GND | SDA2 / SCL2 (I²C2) |
- Each UART connector carries a 5 V output for powering small external modules; serial signals are 3.3 V logic.
- UART2 and UART3 connectors also expose the I²C2 bus (SDA2 / SCL2) for sensors and other I²C peripherals.
- The side buttons are wired to BOOT / BACK (IO0) and USER / OK (IO53); see 6 Buttons and Power Control.
Warning: the 5V pins on the GPIO header and UART connectors are power outputs only. Never feed an external 5 V supply into them, and never connect 5 V directly to a 3.3 V IO pin.
| Control | Signal / multiplexing | Function |
|---|---|---|
| Button 1 | BOOT / IO0 / BACK | Boot mode selection, back, or user input; defined by the boot stage and application |
| Button 2 | USER / OK / IO53 | Confirm or user input; defined by the application |
| Button 3 | RESET | Resets and restarts the device; located on the side of the complete unit |
| Slide switch | Battery connect / disconnect | Connects or isolates the optional battery from the system power path |
The elongated opening on the side of the enclosure is for microSD insertion. USB 5 V, 8–24 V DC, and the battery are separate power paths; confirm the connector labels and supply ratings before connecting anything.
- Check the display, camera, enclosure or backplate, ribbon cables, and connectors for looseness, deformation, or damage.
- Confirm the battery slide switch is at OFF and no external power supply is connected.
- If the system image is supplied on a microSD card, prepare the card per the current firmware documentation and insert it correctly.
- Place the device on a stable, dry, insulated surface, and keep the heatsink and ventilation area unobstructed.
- Choose one power path: USB 5 V, 8–24 V DC, or an installed 4.2 V optional battery.
- Connect the device side first, then the supply side. When using the battery, move the slide switch to ON.
- Wait for the system to boot. Boot time and the interface depend on the installed system and firmware version.
- Use the touchscreen or the USER / OK and BACK buttons to enter the required function.
- If the system provides a shutdown menu or command, perform a software shutdown first and wait for storage access to stop.
- Move the battery switch to OFF, then disconnect the USB or DC supply.
- Remove the microSD card, USB peripherals, or expansion modules only after the device is fully powered down.
The RockBase IoT fully open-source embedded GUI system integrates more than 20 AI vision applications, including object detection, object classification, face keypoints, human detection, pose recognition, gesture recognition, and license plate recognition. The actual application list, menu layout, and model versions follow the system image currently installed on the device.
| Vision category | Face category |
|---|---|
![]() |
![]() |
| Object detection | Face keypoints | Gesture recognition |
|---|---|---|
![]() |
![]() |
![]() |
| Object detection | Face keypoints | Gesture recognition |
| Human pose recognition | License plate recognition |
|---|---|
![]() |
![]() |
| Human pose recognition | License plate recognition |
- Keep the lens clean, and avoid strong backlight, distant targets, rapid motion, and occlusion.
- After entering an application, wait for the model to finish loading before judging the live image and recognition result.
- When developing a custom application, verify the camera channel, image size, pixel format, and model input requirements.
- When capturing or processing face, license plate, voice, or video data, comply with local law and obtain the necessary authorization.
| Method | Rating | Notes |
|---|---|---|
| USB Type-C | 5 V | USB power and charging; use a stable, compliant supply and cable |
| DC input | 8–24 V DC | Verify voltage and polarity before connecting; reverse polarity is prohibited |
| Optional battery | 802540, 4.2 V, 800 mAh | Connected or isolated through the slide switch; not applicable to battery-less configurations |
| Charging current | Approximately 750 mA | Keep the device ventilated while charging and watch for abnormal heat, odor, or deformation |
Battery shipping: because of lithium battery transport restrictions, the complete unit kit ships without a battery by default; the recommended battery is an 802540, 4.2 V, 800 mAh lithium-ion cell. Use only a compliant battery with a protection circuit that matches the device ratings and connector.
Warning: never short-circuit, crush, puncture, disassemble, or incinerate the battery, and never use a swollen, damaged, or leaking cell. If abnormal heat, odor, smoke, or deformation appears, disconnect power immediately and stop using the device.
Runtime and charging time depend on screen brightness, AI workload, Wi-Fi, USB peripherals, ambient temperature, and battery condition. The 800 mAh figure is nominal capacity and is not a runtime guarantee.
| Symptom | Possible cause | Action |
|---|---|---|
| Device will not power on | Battery switch at OFF; non-compliant supply; battery missing or discharged | Power off, then verify the switch, cable, and supply; test with a known-good 5 V USB supply |
| No display | System did not boot; microSD fault; display ribbon cable loose | Power off and check the storage card; inspect the ribbon cable only if you have assembly experience |
| Touch not responding | Moisture on the screen; system overloaded | Clean and dry the screen; wait for the task to finish or press RESET |
| No camera image | Wrong channel selected; ribbon cable loose; lens obstructed | Exit the application and check with power off; reselect the correct camera channel |
| Wi-Fi will not connect | Weak signal; wrong credentials; driver or network configuration fault | Move closer to the access point, verify network parameters, and check the current system configuration |
| USB peripheral not recognized | Unsupported driver; insufficient power; faulty cable | Try a known-good device and cable; use a powered hub |
| GPIO peripheral fault | Wiring direction, common ground, level, or multiplexing mismatch | Power off and check each line against the silkscreen, then verify the software pin configuration |
| Charging fault | Insufficient supply capability; cable voltage drop; battery or charging path fault | Stop use and replace with a compliant supply and cable; contact your supplier if the fault persists |
Warning: never disassemble the device while powered, short pins, or bypass battery protection in order to troubleshoot.
- Use the device only in a dry, clean, well-ventilated environment free of conductive debris.
- Avoid drops, crushing, liquids, metal shavings, strong static discharge, and prolonged direct sunlight.
- Take ESD precautions before handling board-level interfaces, and make sure the device is fully powered off.
- Clean the screen and enclosure with a soft dry cloth, and the lens with a dedicated lens cloth. Never spray cleaner directly onto the device.
- Do not obstruct the heatsink, camera, or speaker openings. Children should use the device under adult or teacher supervision.
- The device is not intended for life support, safety-critical control, or any application where a fault could cause personal injury.
| Resource | Address |
|---|---|
| RockBase-K230-Vision | https://gitee.com/RockBase-iot/RockBase-K230-Vision |
| RockBase-K230-Vision-GUI | https://gitee.com/RockBase-iot/RockBase-K230-Vision-GUI |
| K230 RTOS SDK (GitHub) | https://github.com/kendryte/k230_rtos_sdk |
System interface, application list, and button behavior may change with firmware. Before upgrading, back up your data, use firmware that matches your hardware revision, and keep the power supply stable throughout the upgrade.
The K230 platform also provides a Linux SDK and CanMV firmware for low-level development and custom system builds:
The K230 SDK must be built in a Linux environment. Ubuntu 22.04 is recommended (Windows users can use WSL2 + Docker).
# Clone the source code
git clone https://github.com/kendryte/k230_sdk
cd k230_sdk
make prepare_sourcecode
# Pull the Docker image
docker pull ghcr.io/kendryte/k230_sdk
# Enter the Docker environment
docker run -u root -it -v $(pwd):$(pwd) -v $(pwd)/toolchain:/opt/toolchain -w $(pwd) ghcr.io/kendryte/k230_sdk /bin/bash
# Build (using the EVB board as an example)
make CONF=k230_evb_defconfigBuild artifacts are written to k230_evb_defconfig/images/:
k230_evb_defconfig/images/
├── sysimage-sdcard.img # SD card/eMMC non-secure boot image
├── sysimage-sdcard.img.gz # Compressed version
├── sysimage-spinor32m.img # NOR Flash image
└── ...sudo dd if=sysimage-sdcard.img of=/dev/sdx bs=1M oflag=sync.
├── README.md # English product overview
├── README_zh.md # Simplified Chinese product overview
└── docs/
└── pics/ # Product photos and interface screenshots
Contributions via Issues and Pull Requests are welcome. When modifying either README, please keep the bilingual content in sync and ensure hardware parameters match the product documentation.
License information will be added when the repository's distribution terms are finalized.


















